Home
Search:
Lay In Wireway
NEMA 1
<< Product Information << Operator Interface <<
 
Download PDF
 
 
 
 
Application
  • Construction designed to ensure electrical continuity and to permit fast and easy indoor installation of multiple wireway runs.
Standards
  • UL-50 Type 1
  • cUL Type 1
  • Complies with
    • IEC 60529, IP20
Construction - Screw Cover
  • Formed from 16 or 14 gauge steel
  • Flat covers have keyhole screw slots
  • Straight sections do not have knockouts
  • Unobstructed interior speeds up laying of cables
  • Optional hanger brackets allow for vertical or horizontal mounting
  • Joiners sold separately
Construction - Hinge Cover
  • Formed from 16 or 14 gauge steel
  • Hinge covers are hinged on 24" centers
  • Straight sections are provided with adequate concentric knockouts (1/2", 3/4" conduit size)
  • Knockouts are on 12" centers
  • Joiner is included with each straight section
  • Unobstructed interior speeds up laying of cables
  • Optional hanger brackets allow for vertical or horizontal mounting
Finish
  • Sections and components are finished in ANSI 61 gray.
    Couplings are unpainted galvanized
 
Back to Top
Screw Cover
2.5 x 2.5
4 x 4
6 x 6
8 x 8
10 x 10
12 x 12
Straight Section 12”
Straight Section 18”
-
-
-
Straight Section 24”
Straight Section 36”
Straight Section 48”
Straight Section 60”
Straight Section 72”
-
-
Straight Section 96” - - - - CWSC1096NK CWSC1296NK
Straight Section 120”
Hinged Cover
2.5 x 2.5
4 x 4
6 x 6
8 x 8
10 x 10
12 x 12
Straight Section 12”
Straight Section 18”
-
-
Straight Section 24”
Straight Section 36”
Straight Section 48”
Straight Section 60”
Straight Section 72”
Straight Section 96”
Straight Section 120”
Accessories
2.5 x 2.5
4 x 4
6 x 6
8 x 8
10 x 10
12 x 12
Straight Section Barrier 60”
-
-
Elbow 90 degrees
Elbow 45 degrees
Elbow 22.5 degrees
-
-
Tee Fitting
Cross Fitting
Reducer 4 x 4 to 2.5 x 2.5
-
-
-
-
-
Reducer 6 x 6 to 4 x 4
-
-
-
-
Reducer 8 x 8 to 6 x 6
-
-
-
-
-
Reducer 10 x 10 to 8 x 8
-
-
-
-
-
Reducer 12 x 12 to 8 x 8
-
-
-
-
-
Reducer 12 x 12 to 10 x 10
-
-
-
-
-
Corner Reducer 4 x 4 to 2.5 x 2.5 - CWCRD42 - - - -
Corner Reducer 6 x 6 to 4 x 4 - - CWCRD64 - - -
Corner Reducer 8 x 8 to 6 x 6 - - - CWCRD86 - -
Bracket Hanger Ceiling Type
Bracket Hanger Wall Type
Closing Plate
Adapter (Box Connector)
Joiner
Telescope Fitting
 
 
© Copyright 2012. Hammond Manufacturing Ltd. All rights reserved. Go Back a Page | Top of Page | Home | Contact Webmaster | Contact Us