Hammond Mfg. - Type 12 4500 BTU Top Mt A/C (DTT Series)

Top Mounting DTT Series
4500 BTU/H

Description

Designed for top mounting where space limitations do not allow side mounting on the enclosure surface.
Closed loop cooling ensures clean enclosure air is recirculated without ever mixing with contaminated ambient air.

Standards

Features

R134a refrigerant.
Thermostat control.
Expansion valve increases efficiency with improved evaporator heat transfer and less frequent compressor operation.
Built in condensate evaporator.
Continuous air circulation from high capacity fans.
EMI/RFI suppression meets CE.
Line cord with plug (115 V).
Washable filter mat protected within an easily removable grill.
Gasket, mounting kit and template for cutout and drilling are included.
Condensate drain hose and clamp.
Volt free contact for high pressure failure.
Exterior case easily removable for resetting thermostat and field service.
Can accommodate crane hooks to assist installation.
Versatile design maintains foot print through the series.

Accessories

Technical Data

Refrigeration Data
Rated Capacity	4500 BTU/H (1300 Watts)
Type of Refrigerant	R134a
Regrigerant Charge	480 g
Adjustable Thermostat	Factory setting +95°F (+35°C)
Max. Ambient Air Temp.	+125°F (+52°C)
Min. Ambient Air Temp.	+46°F (+8°C)
Air Capacity (unrestricted)	Internal Circulation 547 CFM External Circulation 547 CFM
Condensation Discharge	Condensate evaporator
Filter Mat	150 g/m²
Db Noise Level	<66 dB (A)
Unit Weight	90 lbs (41 kg)
Exterior Case	Galvanized sheet metal
Finish	RAL7032 beige powder finish
NEMA Rating	Enclosures IP 54/NEMA 12