Home
Search:
1418 Series Freestanding Enclosures - NEMA 4, 12
Accessories
<< Product Information << General Accessories <<
Quick Links:
 
Download PDF
 
Inner Panels
  • Formed from 10 gauge or 12 gauge steel.
  • All double door width panels are 10 gauge steel.
  • Width panels are available in full or half height.
  • Depth panels are available in full height only.
  • Depth and width panels are provided with all mounting hardware and center support where required.
  • Half panel can be mounted in the top or bottom half of the enclosure.
  • Finished in white.
   
   
Depth Panels
Part No. Encl.
Height
Encl.
Min Depth
Panel
W
Panel
H
60FD14
60 18 14 48
72FD9
72 18 9 60
72FD14
72 18 14 60
72FD20
72 24 20 60
72FD26
72 36 26 60
90FD9
90 18 9 78
90FD14
90 18 14 78
90FD20
90 24 20 78
90FD26
90 36 26 78
Side mounted panels for single and double door enclosures.  
Double Door Width Panels
Part No. Description Enclosure Panel Size
60AWFW
Full Panel 60 x 48 48.00 x 44
60AWHW
Half Panel 24.88 x 44
72ZWFW
Full Panel 72 x 48 60.00 x 44
72ZWHW
Half Panel 30.88 x 44
72ZXFW
Full Panel 72 x 60 60.00 x 56
72ZXHW
Half Panel 30.88 x 56
72ZYFW
Full Panel 72 x 72 60.00 x 68
72ZYHW
Half Panel 30.88 x 68
90BWFW
Full Panel 90 x 48 78.00 x 44
90BWHW
Half Panel 39.88 x 44
90BYFW
Full Panel 90 x 72 78.00 x 68
90BYHW
Half Panel 39.88 x 68
   
  Single Door Width Panels
Part No. Description Enclosure Panel Size
60TWFW
Full Panel 60 x 24 48.00 x 20
60TWHW
Half Panel 24.87 x 20
72WFW
Full Panel 72 x 24 60.00 x 20
72WHW
Half Panel 30.87 x 20
90YWFW
Full Panel 90 x 24 78.00 x 20
90YWHW
Half Panel 39.87 x 20
72XFW
Full Panel 72 x 30 60.00 x 26
72XHW
Half Panel 30.87 x 26
60TYFW
Full Panel 60 x 36 48.00 x 32
60TYHW
Half Panel 24.87 x 32
72YFW
Full Panel 72 x 36 60.00 x 32
72YHW
Half Panel 30.87 x 32
90YFW
Full Panel 90 x 36 78.00 x 32
90YHW
Half Panel 39.87 x 32
1418 CS Series Center Panel Supports
  • Adapts panels, swing frames, and panel rails from single door enclosures so they can be used on double door enclosures.
  • Suitable for single or dual access double door enclosures.
  • Center panel support mounts into front to back mounting channels (top and bottom) found in two door enclosures.
  • Allows a combination of two 20" panels in a 48" wide enclosure, two 26" panels in a 60" wide enclosure, or two 32" panels in a 72" wide enclosure.
  • Width is adjustable from 1.91" to 2.34".
  • Support may be positioned at any depth within the enclosure.
  • Finished in white.
Part No. Enclosure Ht.
1418ACS
60
1418ZCS
72
1418BCS
90
Panel Rails
  • Provides 19" or 24" mounting capability.
  • Sold in pairs.
  • Formed from 10 gauge steel.
  • Drilled and tapped 10-32 to EIA spacing of 0.5" - 0.63" - 0.63" - 0.5".
  • Finished in white.

 

Part No. Panel Description Enclosure Width Height Panel U V
1418TFHP
Full Height 60 x 24 19 49.00 3.78 7.78
1418THHP
Half Height 26.25 3.59 7.59
1418WFHP
Full Height 72 x 24 19 61.25 3.66 7.66
1418WHHP
Half Height 31.50 3.97 7.67
1418XFHP
Full Height 72 x 30 24 61.25 3.66 7.66
1418XHHP
Half Height 31.50 3.97 7.67
1418YYFHP
Full Height 90 x 24 19 78.75 3.91 7.91
1418YYHHP
Half Height 40.25 4.09 8.09
Swing Out Frames For 19" Rack Mounting
  • Formed from 10 gauge steel, frames are drilled and tapped to EIA requirements for mounting standard 19" rack accessories.
  • Designed for installation in 72" and 90" high enclosures. The swing frame pivots on 0.5" pins within the enclosure for easy access to the rear of rack mounted equipment.
  • The frame positions at any depth within the enclosure and is fastened in the closed position with quarter turn fasteners.
  • Swing frames may be mounted in 30" and 36" wide enclosures, or in 60" and 72" wide enclosures with an optional center panel support.
  • One or two frames may be mounted in 30" and 36" wide enclosures with dual access, and 1,2,3 or 4 frames may be mounted in 60" and 72" wide dual access enclosures.
  • Finished in black.
 
Part No. A B C Enclosure
Height
Width
Single Door
1418SFYY
78.50 31.80 12.14 90 36
1418SFY
60.50 31.80 12.14 72 36
1418SFX
60.50 25.82 6.14 72 30
   
© Copyright 2008. Hammond Manufacturing Ltd. All rights reserved. Go Back a Page | Top of Page | Home | Contact Webmaster | Contact Us