Home
Search:
Home News Literature Contact Us
Detailed Description Templates
<< Home << SPEC Zone <<
Two Door Enclosures (Wallmounts and Floor Mounts)

Size Range - 24x42x8 inches (600x1060x200mm) - 72x72x24 inches (1820x1820x600mm)

Manufacturer shall construct from 12 - 14 gauge sheet steel. All welds to be continuous, finished smooth and free of all burrs, scales and imperfections. A ground stud shall be provided in the enclosure with rear mounting panel. Doors shall be removable and have permanently secured gaskets with bonding studs.
  Traditional Comtemporary/Euro
Material & Finish
Mild steel Finish in ASA 61 grey outside, white inside
Stainless steel 304 or 316 brushed Finish
Mild steel - RAL 7032 or ASA 61 grey inside and out
Ratings
NEMA 12
NEMA 4
NEMA 4X
NEMA 12
NEMA 4
Construction Details
On NEMA 12 - 3 point key handle
Piano hing ewith removable pin
Formed lip seal
White inner panel
Integrated mounting feet
Lifting eyes (large units only)
On NEMA 12/4 - 3 point key handle
Stainless Steel concealed hinge and pin
Collar lip seal
White or galvanized inner panel
Optional mounting feet
Hammond
1422 Series (Wall or Floor mount)
1422N4 Series (Wall or Floor mount)
2UD Disconnect Series (Wall or Floor mount)
2UDCP Disconnect Series (Wall or Floor mount)
Eclipse Two Door Series (Wallmount)

Spec Tips:

  • Traditional units support greater panel and door loads, especially in freestanding applications.
  • Euro offers more options like latching and handle combinations along with dual NEMA 12/4 ratings

Options:

  • Material thickness upgrade on doors primarly
  • Add stainless steel hinges to type 12
  • Change in handle type, key and pad lock options
  • Factory installed accessories

Accessories common for both styles:

  • Door stop kits, Window kits, Air conditioners, Heaters, Filter fans, Thermostats, Literature pockets, Light kits, Drip shields

Additional accessories for Euro Style:

  • Gland plates, DIN rail kits, Pad lock accessories
 
1422 Floormount Series 1422 Wallmount Series Eclipse Two Door Series 2UDCP Disconnect Series
 
© Copyright 2008. Hammond Manufacturing Ltd. All rights reserved. Go Back a Page | Top of Page | Home | Contact Webmaster | Contact Us