Type 4X Polyester Junction Box (Solid and Clear Cover) (PJU Series)

Designed for use as instrument enclosures, electric, hydraulic or pneumatic control housings, electrical junction boxes or terminal wiring enclosures.
Provides outstanding insulation and protection where equipment may be hosed down or be very wet.
Ideal in applications with high temperatures or highly corrosive environments.

UL 508A Type 1, 2, 3, 4, 4X, 12 and 13 (6P for solid covers only)
cUL Type 1, 2, 3, 4, 4X, 12 and 13 (6P for solid covers only) per CSA 22.2 No. 94
Complies with
- NEMA Type 1, 2, 3, 4, 4X, 12 and 13 (6P for solid covers only)
- IEC 60529, IP66 (IP68 for solid covers only)

Molded fiberglass polyester enclosure with matching cover is easily punched, cut, or drilled.
Enhanced UV inhibitors protect against outdoor weathering.
Standard JIC sizes under 18" x 16".
Threaded brass inserts are provided for optional inner panel or terminal kit mounting. Mounting hardware is included.
Cover fastened with captive stainless steel screws in threaded brass inserts.
Enclosure available with clear Polycarbonate cover to 16" x 14".
Captive oil resistant gasket provides a positive seal.
Available with Polycarbonate flange or foot mount brackets for multi-directional mounting.
Operating temperatures between 130°C and -40°C (266°F to -40°F).
Impact index of 6.78J (5 ft/lb).
For corrosion resistance information, please refer to table in the Technical Information section.

Fiberglass polyester material has a gray finish.
Optional inner panels are available in white powder coated finished steel or unfinished aluminum, or Fiberglass.

Gallery Image

Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)

Units shown: inch. Switch units to: mm