Liquid-Tight Cordgrips (Nickel Plated Brass) 1427BCG Series

IP68, UL Listed. PG & Metric

English | Français

Features

  • Liquid-tight cordgrip made from nickel plated brass
  • Used where cable is entering or leaving an enclosure.
  • Accepts a wide range of cable diameters due to large opening and NBR (nitrile rubber) seal.
  • The strain relief elements tighten in a circular sequence on the sealing ring to give outstanding strain relief without twisting or damaging the cable.
  • Use the cordgrip with the smallest maximum diameter that will fit your application (see table below).
  • Locknut and EPDM o-ring included (as shown).
  • Designed to meet NEMA Type 4, 4X, 6, 6P, 12 & 13 - Protection to IP68.
  • -40C to + 100C working temp with a temporary heat resistance up to 120C.
  • UL listed. 

Gallery Image

Part Details

Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)

PG Threads

Units shown: mm. Switch units to: inch

Thread Size Mounting Hole Wire Diameter Outer Length Inner Thread Length
Part Number Material (D) Diameter Min Max (L) (T)
1427BCGPG7 Nickel Plated Brass PG7 24 3 4 19 5
1427BCGPG9 Nickel Plated Brass PG9 15 4 8 21 6
1427BCGPG11 Nickel Plated Brass PG11 19 5 10 22 6
1427BCGPG13 Nickel Plated Brass PG13 21 6 12 23 7
1427BCGPG16 Nickel Plated Brass PG16 23 10 14 24 7
1427BCGPG21 Nickel Plated Brass PG21 29 13 18 24 7
1427BCGPG29 Nickel Plated Brass PG29 37 18 25 31 8
1427BCGPG36 Nickel Plated Brass PG36 48 22 32 37 8
1427BCGPG42 Nickel Plated Brass PG42 55 32 38 37 9
1427BCGPG48 Nickel Plated Brass PG48 60 37 44 38 10

Metric Threads

Units shown: mm. Switch units to: inch

Thread Size Mounting Hole Wire Diameter Outer Length Inner Thread Length
Part Number Material (D) Diameter Min Max (L) (T)
1427BCGM12 Nickel Plated Brass M12x1.5 12 3 7 19 7
1427BCGM16 Nickel Plated Brass M16x1.5 16 4 8 21 6
1427BCGM16L Nickel Plated Brass M16x1.5 16 5 10 22 6
1427BCGM20 Nickel Plated Brass M20x1.5 20 6 12 23 6
1427BCGM20L Nickel Plated Brass M20x1.5 20 10 14 24 6
1427BCGM25 Nickel Plated Brass M25x1.5 26 13 18 25 7
1427BCGM32 Nickel Plated Brass M32x1.5 32 18 25 31 8
1427BCGM40 Nickel Plated Brass M40x1.5 40 22 32 37 8
1427BCGM50 Nickel Plated Brass M50x1.5 50 32 38 37 9
1427BCGM63 Nickel Plated Brass M63x1.5 63 29 35 38 10

Torque Specifications

Sealing Nut Torque (N-m) Locknut Torque (N-m)
Thread Size Min. Max. Min. Max.
PG7 1.5 2.5 2.5 3.5
PG9 2 3 3.5 4.5
PG11 3 4 4.5 5.5
PG13.5 4 5 6 8
PG16 5 7 7 9
PG21 6 8 8 10
PG29 8 10 9 11
PG36 13 16 13 15
PG42 18 20 15 19
PG48 21 24 17 20
M12 1 2 2.5 3.5
M16 (small) 2 3 3.5 4.5
M16 (large) 3 4 4 5
M20 (small) 4 5 5 6
M20 (large) 5 6 7 9
M25 6 8 8 10
M32 12 14 10 14
M40 17 19 15 18
M50 20 24 17 20
M63 24 27 19 23
Note: The above table should be considered a guide. Actual torque values can vary depending on the application.

Need Assistance? Contact Us.

Data subject to change without notice.

Tags: cord grip, cord gland, cable gland, cable grip