Vertical Basic PDU with Shielded Cord 1588-9-JV Serie

Features

• Low-profile slim design constructed of rugged light weight aluminum.
• Designed for a variety of applications, specifically where electromagnetic or radio frequency interference is a concern:
  • Shielded cord reduces EMI/ RFI and "dirty" power from utilities.
  • Shielding is by way of 100% coverage in aluminum mylar foil with a 20 gauge drain wire.
• Each outlet strip includes a hardware mounting kit. Order P/N: 1585CLIP for additional hardware kit.
• Includes toolless PDU button mounting provision.
• Receptacles are 1” square and are equally spaced over the length of the power strip.
• With on/off switch and 15 or 20 Amp circuit breaker.

Specifications

• Heavy duty cord, either 12 gauge (12/3 SJT) or 14 gauge (14/3 SJT) wire for extreme temperature ranges and integral molded plug.
• Plug types for 15 Amp models are NEMA 5-15P straight blade or NEMA L5-15P locking type.
• Plug types for 20 Amp models are NEMA 5-20P straight blade or NEMA L5-20P locking type.
• Rated 15 or 20 amps, 120 volts.
• UL/cUL Listed Standard UL1363, CSA C22.2 No. 308-14, and CSA C22.2 No. 0.4-04
• NOTE #1: Outlet strips can NOT be used between the front & rear panel rails of rack cabinets as they (and the equipment plugs) will interfere with mounted equipment and mounted accessories.
• NOTE #2: To properly use on rack cabinets, allow sufficient depth BEHIND the rear panel rails for vertically mounting to the cabinet.
• TAA-compliant for federal GSA schedule purchases within the USA.
• RoHS Compliant.
• Manufactured in North America.

Toolless button PDU mounting provision shown

Plug Types

5-15P Straight Blade

L5-15P Locking Type

5-20P Straight Blade

L5-20P Locking Type