Swing-Out Wall-Mount Rack Cabinet (350 lb) HWC Serie

High-capacity swing-out cabinet with UL2416 and seismic load ratings for secure, serviceable IT and telecom installations.

English | Français

Especificación A&E

  • Overall dimensions shall be 24.68" or 30.68" W × __" H × __" D (refer to table). Weight capacity shall be UL2416 rated for 350 lbs. Removable center section with spring-hinge pin system allows one-person installation and easy access to equipment. Usable depth shall be __" (refer to table).
  • Center section shall be constructed of 16-gauge steel, phosphate pre-treated and finished in black sand-textured powder coat paint. Rear wall mount section shall be constructed of 14-gauge steel, phosphate pre-treated and finished in black sand-textured powder coat paint.
  • Mounting rails shall be constructed of 12-gauge steel with tapped 10-32 mounting holes in universal EIA spacing, finished in smooth black powder coat paint. Rack cabinet shall be center-swing design, constructed to swing open for full rear component and cabling access. Center section shall pivot to allow for either left or right opening, field reversible.
  • Top and bottom of rear wall mount section shall include conduit-compatible knockouts of 1-1/8”, 1-3/8”, 2” and 3”. Sides of the rear wall mount section shall include conduit-compatible knockouts of 2” and 2-1/2”. A large laser knockout on the rear panel shall provide a 16" x 12" cutout for electrical pull-box interface.
  • Fan knockouts shall be located on the side panels of the center section, allowing installation of up to six (6) 4-1/2” fans. Additional vent patterns may be included depending on model configuration. Rear cable access and lancing points for wire management and outlet strip mounting shall be included.
  • Rack shall be UL Listed in the US and Canada to UL 2416 (NWIN) category. Rack cabinet shall meet all enclosure requirements toward PCI DSS (Payment Card Industry Data Security Standard) compliance. Rack shall comply with RoHS EU Directive 2011/65/EU. Rack shall be manufactured by an ISO 9001 registered company.

Download our full DIV 27 11 16 specification