Recursos de productos
Enlaces
Descargas
Compartir este producto
Features
- BAND COVERAGE
- 80 Meter, 40 Meter, 20 Meter, 15 Meter & 10 Meter (Modification required for U.S. models) Amateur Bands
- TUBE COMPLIMENT
- Two (2) Eimac 3-500Z Zero Bias Triodes
- Operated AB2 - Grounded Grid Service
- MODE AND DUTY CYCLE
- SSB (2 KW PEP Input)
- CW, RTTY, AM, ATV (1 KW Input)
- Continuous Duty
- SSB/CW switch
- For Optimum Efficiency in all Modes
- SSB = 2,900 VDC plate voltage minimum - with resting current
- CW = 2,100 VDC plate voltage minimum - with resting current
- DRIVE POWER
- 75 Watts to 125 Watts
- COOLING
- Forced Air
- Pressurized Plenum and Chimney Cooling
- Continuous Duty - Squirrel Cage Blower (low noise - 60 cfm)
- Time delay circuit cools tubes down after power has been removed (extending the life of the 3-500Z triodes)
- ALC
- Adjustable (Negative) to - 8VDC
- TUNING
- Vernier tuning for smooth and accurate settings on all bands
- 0 - 100 dial skirt log for easy resetting
- SAFETY
- Interlock for input AC
- 100% Fused AC line and Cathode Circuit
- POWER TRANSFORMER
- Special Hammond High Voltage Transformer
- Designed for Continuous Duty at 1,100VA - 60 Hz.
- Weight 28 Lbs.
- Separate Hammond Filament Transformer
- POWER SUPPLY
- Computer Grade Capacitors for Max. Reliability
- INPUT CIRCUIT
- 50 Ohm
- Pi-Input Circuitry for each band
- OUTPUT CIRCUIT
- Full Pi-L Network
- BY-PASS STANDBY SWITCH
- Front Panel - for easy operation
- ANTENNA RELAY
- DC Relay for hum-free operation
- LINE VOLTAGE
- 120VAC or 240VAC (240VAC Recommended)
- METERING
- Soft - Back Lit
- Left Meter - Multimeter - High Voltage or Grid Current or Forward Power (2KW) or Reflected Power (200W)
- Right Meter - Fixed - Plate Current
- TRANSIENT PROTECTION
- Primary HV and Filament Surge Suppression
- FINISH
- Similar color scheme to the Rockwell Collins KWM-380 (Released in Fall 1979)
- Matched to our AT-1500 antenna transmatch.
- Outer Steel Cabinet Painted Textured Baked Enamel - Hammond "Earth Brown"
- Front Panel Painted Smooth Baked Enamel - Hammond "Cream Beige"
- MOUNTING
- Includes 1/2" high heavy duty rubber feet mounted on 1/4" dimples on cabinet (won't scratch mounting surface)
- Can be rack mounted (with proper ventilation) - on a rack shelf with or without outer cabinet
- WEIGHT
- 75 Lbs. or 34 Kg. (87 Lbs. or 39 Kg. with cabinet)
Galería
Detalles de la pieza
Haga clic en Número de pieza, más abajo, para obtener más detalles (por ejemplo, dibujos del producto, instrucciones de montaje, peso de envío).
Unidades mostradas: inch. Cambia de unidad: mm
| Part No. | Overall Dimensions | Overall Dimensions (Less Cabinet) | ||||
|---|---|---|---|---|---|---|
| Height | Width | Depth | Height | Width | Depth | |
| HL-2000A | 9.25 | 17.25 | 16.38 | 8.50 | 17.00 | 16.00 |
¿Necesita ayuda? Póngase en contacto con nosotros.
Datos sujetos a cambios sin previo aviso.













