Recursos de productos
Compartir este producto
Features
- Couple 3.2, 8 or 16 ohm speakers to 25 or 70 volt line outputs of amplifiers.
- Up to 5 power tap levels available (except 117F2 which has 4).
- Primary taps marked in watts (no calculation necessary), to match speaker power.
- For speaker matching from older "Classic" 600 Ohm equipment - check out our 119DA matching transformer.
- Frequency response 100 Hz. to 9 Khz. (1 db. reference @1 Khz.)
- Insertion loss less than 2 db.
- Distortion is less than 1.25% @ 100 Hz. at maximum power.
- Horizontal, channel bracket, 2-hole (.187" dia.) mounting.
- All models have solder lugs, also suitable for slip on jumper connections.
- Total power requirements of speakers should not exceed the rated power of each transformer or rated power of the amplifier.
Detalles de la pieza
Haga clic en Número de pieza, más abajo, para obtener más detalles (por ejemplo, dibujos del producto, instrucciones de montaje, peso de envío).
Unidades mostradas: inch. Cambia de unidad: mm
| Part No. | System | Power Rating | Audio Power | Voice Coil Impedance | Mounting | Wt. | Overall Dimensions | |||
|---|---|---|---|---|---|---|---|---|---|---|
| Volts | (Watts) | Taps | (Ohms) | Centers | ( lbs.) | A | B | C | D | |
| 117F2 | 70 | 2 | 2, 1, 1/2, 1/4 | 8 | 2.00 | 0.5 | 2.38 | 1.38 | 1.38 | 2.00 |
| 117E4 | 70 | 4 | 4, 2, 1, 1/2, 1/4 | 3.2 | 2.38 | 0.6 | 2.81 | 1.50 | 1.69 | 2.38 |
| 117F4 | 70 | 4 | 4, 2, 1, 1/2, 1/4 | 8 | 2.38 | 0.6 | 2.81 | 1.50 | 1.69 | 2.38 |
| 117E8 | 70 | 8 | 8, 4, 2, 1, 1/2 | 3.2 | 2.81 | 0.9 | 3.25 | 1.75 | 2.00 | 2.81 |
| 117F8 | 70 | 8 | 8, 4, 2, 1, 1/2 | 8 | 2.81 | 0.9 | 3.25 | 1.75 | 2.00 | 2.81 |
| 117E16 | 70 | 16 | 16, 8, 4, 2, 1 | 3.2 | 3.13 | 1.5 | 3.69 | 2.00 | 2.31 | 3.13 |
| 117F16 | 70 | 16 | 16, 8, 4, 2, 1 | 8 | 3.13 | 1.5 | 3.69 | 2.00 | 2.31 | 3.13 |
| 117G16 | 70 | 16 | 16, 8, 4, 2, 1 | 16 | 3.13 | 1.5 | 3.69 | 2.00 | 2.31 | 3.13 |
| 117F32 | 70 | 32 | 32, 16, 8, 4, 2 | 8 | 3.56 | 2.3 | 4.03 | 2.25 | 2.63 | 3.56 |
| 117J4 | 25 | 4 | 4, 2, 1, 1/2, 1/4 | 3.2 | 2.38 | 0.6 | 2.81 | 1.50 | 1.69 | 2.38 |
| 117K4 | 25 | 4 | 4, 2, 1, 1/2, 1/4 | 8 | 2.38 | 0.6 | 2.81 | 1.50 | 1.69 | 2.38 |
| 117J8 | 25 | 8 | 8, 4, 2, 1, 1/2 | 3.2 | 2.81 | 0.6 | 3.25 | 1.75 | 2.00 | 2.81 |
| 117K8 | 25 | 8 | 8, 4, 2, 1, 1/2 | 8 | 2.81 | 0.6 | 3.25 | 1.75 | 2.00 | 2.81 |
| 117K16 | 25 | 16 | 16, 8, 4, 2, 1 | 8 | 3.13 | 1.5 | 3.69 | 2.00 | 2.31 | 3.13 |
| 117K32 | 25 | 32 | 32, 16, 8, 4, 2 | 8 | 3.56 | 2.3 | 4.03 | 2.25 | 2.63 | 3.56 |
¿Necesita ayuda? Póngase en contacto con nosotros.
Datos sujetos a cambios sin previo aviso.
Tags: audio transformer, speaker, amplifier, line matching, distortion, bracket mount
