Share this Product
- Compact design for side mounting on any enclosure surface where hot spot cooling or low capacity cooling is required.
- Closed loop cooling ensures clean enclosure air is recirculated without ever mixing with contaminated ambient air.
- Air conditioners are shipped separately and installed on site
- Maintains enclosure's NEMA 12 rating
- IP 54
- UR, cUR and CE
- R134a refrigerant.
- Thermostat control accessible from inside enclosure.
- Expansion valve increases efficiency with improved evaporator heat transfer and less frequent compressor operation.
- Direct condensate discharge via 1/4" NPT threaded port.
- Continuous air circulation from high capacity fans.
- EMI/RFI suppression meets CE.
- Door contact for power down when enclosure door is opened.
- Gasket, mounting kit and template for cutout and drilling are included.
- Washable aluminum mesh filter
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
|Cooling Capacity +95/+95F +35/+35C||1194 BTU/h (350 Watts)|
|Type of Refrigerant||R134a|
|Refrigeration Charge||150 g|
|Adjustable Control Range||+50F..104F / +10C..+40C Factory setting +95F/+35C|
|Max Ambient Air Temp||+114F (+45C)|
|Min Ambient Air Temp||+46F (+8C)|
|Air Capacity (unrestricted)||Internal 38 CFM|
|External 30 CFM|
|Condensation Discharge||Condensate Drain|
|Filter Mat||Aluminum Mesh|
|Db noise level||<64 db|
|Unit Weight||30 lbs (13.6kg)|
|Exterior Case||Galvanized sheet metal|
|Finish LG||RAL7035 light Gray|
|Finish GY||ANSI 61 Gray|
|Nema Rating||enclosures IP54 / NEMA 12|
Data subject to change without notice.