Type 4X Polyester Wallmount Enclosure PW Series

Hinge Door with Quarter Turn

English | Français

Note: This product line has been discontinued as a stocked series. Information is for reference only. For alternative solution assistance, please contact Hammond here or call: USA (716) 630-7030, Canada and International (519) 822-2960.

Application  

  • Designed to house Industrial control, instrumentation, pneumatic, valve and pump control systems.
  • Excellent protection against corrosion and ultra violet rays making this a suitable enclosure for outdoor installations.
  • High resistance to impact and temperature for industrial installations when subjected to frequent water exposure.

Standards

  • UL/cUL 508A Type 1, 2, 3, 4, 4X, 12 & 13
  • Complies with
    • NEMA 1, 2, 3, 3R, 3S, 4, 4X, 12, 13
    • IEC 60529, IP 66

Construction

  • Fiberglass reinforced polyester is self extinguishing and has operating temperatures of -50°C to 150°C (-58°F to 302°F).
  • One piece monoblock body.
  • Entire enclosure can be reversed to allow door to swing right or left.
  • Built-in canopy at top and bottom protects the door and gasket and allows reversibility.
  • Self-ventilating openings are located at the rear of the enclosure to permit installation of breather or pressure compensation plugs.
  • Internal stainless steel hinges, built into the door with captive pins.
  • Door opening of over 180°.
  • Quarter turn fasteners are located outside the gasketed area.
  • Grid pattern is provided on inside door area for ease of locating equipment.
  • Tamperproof "double bar" quarter turn fasteners.
  • Dielectric rigidity > 5kV insulating resistance > 5 MW.
  • For corrosion resistance information, please refer to table in the Technical Information section.

Finish

  • Fiberglass polyester material is finished in RAL 7032 beige.
  • Optional inner panels are available in white powder coated finished steel or unfinished aluminum.

Accessories

Gallery Image

Part Details

Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)

Units shown: mm. Switch units to: inch

Part No. Overall Dimensions Enclosure Opening Surface Mounting Emboss Ship Wt.
A B C F G H I J K L M N P Q R S lbs
PW433320 430 330 200 380 260 325 225 375 150 13 181 3 179 168 247 150 10
PW534320 530 430 200 480 360 425 325 475 250 13 181 3 279 168 347 150 14
PW654425 647 436 250 580 360 525 325 575 250 13 228 3 279 212 388 192 18
PW755430 747 536 300 680 460 625 425 675 350 15 278 3 379 261 487 241 27
PW856430 847 636 300 780 560 725 525 775 450 15 278 3 479 261 587 241 33

Need Assistance? Contact Us.

Data subject to change without notice.