Product Resources
Links
Share this Product
Key Features:
- Modern, high quality instrument enclosure.
- Made of diecast aluminum material (GD Al Si 12/DIN 1725).
- Includes captive stainless steel lid screws.
- Internal mounting channels can be accessed after lid is closed.
- 1.7mm recess is integrated in lid for membrane keypads and front panels.
- Comes with preformed TPE gasket installed.
- Clip-on screw covers hide mounting and lid screws.
- Screw covers are made of RAL 7040 grey PMO plastic.
- Degree of protection: NEMA 4X, IP67.
- CSA and UL listed to Type 4.
- Finished in textured RAL 7040 gray polyester powder coat, RAL 7040 grey.
- Can be supplied unpainted on special order.
Features (click to enlarge)
Enclosure can be installed after closing lid.
Includes optional-use lid captivation straps.
Snap-in design covers hide both lid screws and installation holes.
All holes are outside of gasket seal.
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
| Part Number | Length (mm) | Width (mm) | Depth With Lid (mm) |
|---|---|---|---|
| R191-052-000 | 50 | 75 | 33 |
| R191-054-000 | 50 | 100 | 33 |
| R191-070-000 | 70 | 100 | 50 |
| R191-090-000 | 90 | 120 | 60 |
| R191-072-000 | 70 | 140 | 50 |
| R190-110-000 | 110 | 140 | 60 |
| R191-092-000 | 90 | 160 | 60 |
| R190-130-000 | 130 | 160 | 70 |
| R191-074-000 | 70 | 180 | 50 |
| R190-150-000 | 150 | 180 | 60 |
| R191-150-000 | 150 | 180 | 90 |
| R190-112-000 | 110 | 200 | 60 |
| R190-170-000 | 170 | 200 | 60 |
| R191-170-000 | 170 | 200 | 90 |
| R190-132-000 | 130 | 220 | 70 |
| R191-200-100 | 200 | 230 | 120 |
| R191-094-000 | 90 | 250 | 60 |
| R190-152-000 | 150 | 260 | 60 |
| R191-152-000 | 150 | 260 | 90 |
| R190-172-000 | 170 | 280 | 60 |
| R191-172-000 | 170 | 280 | 90 |
| R191-202-100 | 200 | 330 | 120 |
Similar Products
Data subject to change without notice.
Tags: Rolec, diecast, aluminum, thick wall, NEMA, screw cover, alucase
