Subminiature Plastic Enclosures (1551MINI Series)

Ideally suited for mounting of printed circuit boards horizontally.
Molded in ABS plastic (material has a UL94-HB rating).
Choice of three (3) lengths in five (5) colors. Stocked in black, grey. translucent clear, translucent smoke and translucent red.
Satin texture finish.
Cover is recessed for easy label installation.
Complete with lid and two self tapping screws (plated for grey & clear, black for all other colors).
Two (2) or four (4) P.C. board standoffs molded into interior depending on enclosure size (see drawings for details).
Designed to meet IP54.
For these same sizes pre-configured for a USB Type A male connector, try our 1551USB series.
For slightly larger enclosures secured with (4) screws, try our 1551 series.

Extra self tapping lid screws are #2 x 1/2" (Plated - Qty 50 - Part number 1551USB50 and Black - Qty 50 - Part number 1551USB50BK)
To secure P.C. board use self tapping #2 x 3/16" screws (Qty 100 - Part number 1553WTS100) - not included with enclosure.

Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)

Units shown: inch. Switch units to: mm

Part Number	Color	Length	Width	Depth
1551ABK	Black	1.38	0.79	0.61
1551AGY	Grey	1.38	0.79	0.61
1551ACLR	TransClear	1.38	0.79	0.61
1551ATSK	TransSmoke	1.38	0.79	0.61
1551ATRD	TransRed	1.38	0.79	0.61
1551BBK	Black	1.97	0.98	0.61
1551BGY	Grey	1.97	0.98	0.61
1551BCLR	TransClear	1.97	0.98	0.61
1551BTSK	TransSmoke	1.97	0.98	0.61
1551BTRD	TransRed	1.97	0.98	0.61
1551CBK	Black	2.56	1.18	0.61
1551CGY	Grey	2.56	1.18	0.61
1551CCLR	TransClear	2.56	1.18	0.61
1551CTSK	TransSmoke	2.56	1.18	0.61
1551CTRD	TransRed	2.56	1.18	0.61

Subminiature Plastic Enclosures 1551MINI Series