Audio Broadcast Quality 800A Series

Features

  • Deep-drawn steel case with tin plated finish, with two convenient 6-32 mounting studs with hardware.
  • Includes wire leads (minimum length of 4").
  • Frequency response +/- 0.5 db max. from 50 Hz. to 15 Khz.
  • Insertion loss of apx. 1 db.
  • Maximum power level +15 dbm. (except 841A, 842A & 844A which are +20 dbm) with specified characteristics, or higher levels with reduced low frequency performance.
  • Electrostatic shield between pri. & sec.
  • Humbucking construction
  • Balanced split windings on pri. & sec. for circuit versatility. Primary may be used as a secondary and vice versa for impedance matching.
  • Overall dimensions 1.75" (44.5 mm) wide x 1.25" (31.8 mm) deep x 2.56" (65 mm) high max.
  • Shipping weight 0.5 lb. (0.2 kg)

Part No. Application Nominal Impedance Max. Primary D.C.
(Ohms) Unbalanced Current
Primary Secondary (ma.)
801A Isolating, Matching *50/200 50/200 0.8
802A Isolating, Matching *50/200 (60/240) 125/500 (150/600) 0.8
804A Isolating, Matching, Hybrid *125/500 (150/600) 125/500 (150/600) 0.5
806A Dynamic MIC or Voice Coil to Grid *7.5/30 10K/40K 1.6
807A Dynamic MIC or Voice Coil to Base *7.5/30 600/2400 1.6
808A MIC or Mixer to Single or P.P. Grid *50/200 10000/40000 0.6
809A MIC to Mixer to Base *50/200 600/2400 0.6
812A Line or 150 ohm MIC to 1 or 2 Grids *125/500 (150/600) 10K/40K (12K/48K) 0.4
813A Line or 150 ohm MIC to Base *125/500 (150/600) 600/2400 (720/2880) 0.4
832A Interstage (ratio 1:2) 5K/20K 20K/80K 0
834A Interstage (ratio 1:4) 5K/20K 10K/40K 0
835A Interstage (ratio 1:1) 10K/40K 10K/40K 0
841A ** P.P. Plates to Line 5K/20K 50/200 0
842A ** P.P. Plates to Line 5K/20K (6K/24K) 125/500 (150/600) 0
844A ** P.P. Plates to Line 10K/40K (12K/48K) 125/500 (150/600) 0

Admin: Edit on Google Docs

Need Assistance? Contact Us.

Data subject to change without notice.