Type 4X Polyester Wallmount Enclosure PW Serie

Application  

• Designed to house Industrial control, instrumentation, pneumatic, valve and pump control systems.
• Excellent protection against corrosion and ultra violet rays making this a suitable enclosure for outdoor installations.
• High resistance to impact and temperature for industrial installations when subjected to frequent water exposure.

Standards

• UL/cUL 508A Type 1, 2, 3, 4, 4X, 12 & 13
• Complies with
  • NEMA 1, 2, 3, 3R, 3S, 4, 4X, 12, 13
  • IEC 60529, IP 66

Construction

• Fiberglass reinforced polyester is self extinguishing and has operating temperatures of -50°C to 150°C (-58°F to 302°F).
• One piece monoblock body.
• Entire enclosure can be reversed to allow door to swing right or left.
• Built-in canopy at top and bottom protects the door and gasket and allows reversibility.
• Self-ventilating openings are located at the rear of the enclosure to permit installation of breather or pressure compensation plugs.
• Internal stainless steel hinges, built into the door with captive pins.
• Door opening of over 180°.
• Quarter turn fasteners are located outside the gasketed area.
• Grid pattern is provided on inside door area for ease of locating equipment.
• Tamperproof "double bar" quarter turn fasteners.
• Dielectric rigidity > 5kV insulating resistance > 5 MW.
• For corrosion resistance information, please refer to table in the Technical Information section.

Finish

• Fiberglass polyester material is finished in RAL 7032 beige.
• Optional inner panels are available in white powder coated finished steel or unfinished aluminum.

Accesorios

• Inner Panel
• Adjustable Depth Supports
• Mounting Feet
• Rear Blanking Cover
• Padlock Adaptor
• Porthole Viewing Windows
• Hinged Viewing Windows
• Large Viewing Windows
• Air Vents
• Rail Fixing Insert
• Moulded Double Bar Enclosure Key