Diecast Aluminum Enclosures 1590-RIBBED Serie

With Internal Ribs

English | Français

Features

  • Rugged, diecast aluminum alloy (tough - yet easy to machine), electronic instrument enclosure.
  • Lap joint construction provides protection against access of dust and splashing water. 
  • Unpainted version is vibra finished for a smooth surface with no sharp edges.
  • Satin black painted version is painted with tough polyester powder paint for a lasting finish, even after machining. Black screws are included to enhance appearance.
  • Includes screws threaded into factory-tapped holes. Screw type and quantity vary.  See details below or in drawings.
  • Standard versions are designed to meet IP54.
  • Water-tight versions are designed to meet IP65 and include a gasket which is supplied loose inside the enclosure (not pre-installed).
  • Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.

Hardware

NOTE: 1590 series enclosures feature factory-tapped assembly screw holes that accept machine screws, which are included with the enclosures.

Replacement Hardware

 

Tamper-proof Hardware Upgrade (Torx w/ Pin)

   
See "Hardware" table below for compatibility.

Gaskets

NOTE: Gaskets are included with watertight 1590 enclosures.  They can also be purchased as a kit if you'd like to upgrade an IP54 enclosure to IP65.  Not available for all sizes.

  • Each kit includes two pre-formed silicone gaskets.
  • Gaskets include adhesive backing for easy installation.
  • Allows enclosure to be machined and/or painted first and gasketed later.
  • Gasket is applied to the lid.
  • Designed to meet IP65 with properly installed gasket and lid screws torqued to 25-30 cN.m (36-43 ozf.in).
  • Refer to part number table below for correct gasket.

Detalles de la pieza

Haga clic en Número de pieza, más abajo, para obtener más detalles (por ejemplo, dibujos del producto, instrucciones de montaje, peso de envío).

Unidades mostradas: mm. Cambia de unidad: inch

No Mounting Flanges w/ Flanged Lid w/ Flanged Bottom Plate Optional
Standard Water-Tight Standard Water-Tight Standard Water-Tight Replacement
Version Version Version Version Version Version Color Length Width Depth Gasket Kit
1590MM Natural 50 50 31
1590MMBK Black 50 50 31
1590L 1590LF Natural 101 40 25
1590LBK Black 101 40 25
1590M 1590MF Natural 112 63 31
1590MBK Black 112 63 31
1590N 1590WN 1590NFL 1590WNFL 1590NF 1590WNF Natural 121 66 40 1590NGASKET
1590NBK 1590WNBK 1590NFLBK 1590WNFLBK 1590NFBK 1590WNFBK Black 121 66 40 1590NGASKET
1590PP Natural 121 85 61
1590PPBK Black 121 85 61
1590P 1590WP 1590PFL 1590WPFL 1590PF 1590WPF Natural 153 83 50 1590PGASKET
1590PBK 1590WPBK 1590PFLBK 1590WPFLBK 1590WPFBK Black 153 83 50 1590PGASKET
1590R 1590RF Natural 192 102 61 1590RGASKET
1590RBK Black 192 102 61 1590RGASKET
NOTE: Dimensions include lid. Lid height is 4mm (0.16").

Replacement Hardware

Philips Head Machine Screws (100 or 50-packs) Torx with Pin Tamper-Resistant Screws (50-packs)
Water Water-Tight Water Water-Tight Screwdriver
Size Natural Black Tight Black Natural Black Tight Black Bit
1590L 1550MS100 1550MS100BK 1550WMS100 1550WMS100BK 1550MS50T 1550MS50TBK 1550WMS50T 1550WMS50TBK SCDRIVET15-2
1590MM 1550MS100 1550MS100BK 1550WMS100 1550WMS100BK 1550MS50T 1550MS50TBK 1550WMS50T 1550WMS50TBK SCDRIVET15-2
1590M 1550MS100 1550MS100BK 1550WMS100 1550WMS100BK 1550MS50T 1550MS50TBK 1550WMS50T 1550WMS50TBK SCDRIVET15-2
1590N 1550MS100 1550MS100BK 1550WMS100 1550WMS100BK 1550MS50T 1550MS50TBK 1550WMS50T 1550WMS50TBK SCDRIVET15-2
1590PP 1550MS100 1550MS100BK 1550WMS100 1550WMS100BK 1550MS50T 1550MS50TBK 1550WMS50T 1550WMS50TBK SCDRIVET15-2
1590P 1550MS100 1550MS100BK 1550WMS100 1550WMS100BK 1550MS50T 1550MS50TBK 1550WMS50T 1550WMS50TBK SCDRIVET15-2
1590R 1550MS100 1550MS100BK 1550WMS100 1550WMS100BK 1550MS50T 1550MS50TBK 1550WMS50T 1550WMS50TBK SCDRIVET15-2

¿Necesita ayuda? Póngase en contacto con nosotros.

Datos sujetos a cambios sin previo aviso.

Tags: diecast, die cast, electronic, board enclosure, screw down cover, stomp box, project box, flanged, bottom flange, flanged lid, partitioning, ribs, PCB mount