Water-Tight ABS Plastic R220 Serie

Key Information:

Application

• ABS plastic enclosures are designed for use as instrument enclosures, electrical junction boxes, or terminal wiring enclosures where metallic enclosures are not suitable. 
• Modern design with slanted top edges.
• Provide outstanding protection against dust, oil, and pressurized water.
• Impervious to atmospheric and marine corrosion.

Standards

• NEMA Type 4, 4X, 12 and 13
• IP66
• UL94 HB Flammability Rating

Construction

• Molded in ABS plastic. 
• Separate mounting channels and lid channels. 
• Recessed polyurethane gasket with tongue and groove construction.
• Interlocking lip on lid and bottom sections.
• Captive stainless steel lid screws are provided.
• Cover screws fasten into pre-threaded holes.

Finish

• Light grey RAL 7035

1. Separate screw channels outside of the gasket seal (lid screws & enclosure mounting screws).
2. There are many mounting posts for self tapping screws in both the enclosure & the lid. Can also be used for mounting P.C. boards or plates.
3. Thermoplastic forpene gasket.
4. Enclosure mounts through channel and bottom holes, concealed when lid is attached.