Legacy Hammond Modular Racks 1469 Series

English | Français

Note: This product line has been discontinued as a stocked series. Information is for reference only. It has been replaced with C2 Series. For alternative solution assistance, contact Hammond here or call: USA (716) 630-7030, Canada and International (519) 822-2960.

Features

  • Modular all welded 14 ga. formed steel frame with open sides.
  • Removable louvered rear door, with square corners on concealed pin hinges with flush keyed lock (1427 B).
  • Rack and dress panels have a modern angular appearance.
  • May be joined to companion unit with six conveniently supplied bolts to form sturdy equipment housings.
  • One set of 2 vertical 10 ga. panel rails drilled and tapped for 10-32 screws on standard EIA/RETMA rack spacing of 0.5-1.25" are fully adjustable on horizontal Amhal struts.
  • Two adjustable 12 ga. Z rails mounted on Amhal struts.
  • Two 0.75in x 1in conduit knock out provided in flange below rear door.
  • Cut out in bottom 9x11" for cable or conduit entrance with bolted coverplate.
  • Durable baked grey hammerlin enamel finish.
  • Two stainless steel vertical dress trims covering panel screws and one horizontal top dress trim.
  • One set of 8 wiring clips — 4 each front and rear.
  • Corner wedge units have full height with removable rear cover-plates. 

Please note that the 1469 series was discontinued over twenty (20) years ago and replacement parts are no longer available. Please consider our C2 or C4. 

1469_drawing

Need Assistance? Contact Us.

Data subject to change without notice.